BenCathro

The sensor you're using to track the session energy appears to be cumulative. The charging session begins with the sensor already at about 30kwh.

I can't speak to the times being wrong as I'm still quite new to Home assistant and this integration. All I know is that my sensor of the same name...

I’m in a very similar position to Andy. Same tariff, same battery system (AIO), no configuration errors that I can see and I’m struggling to stop the battery from charging...

Thanks for the reply gcoan. What confuses me about that is that predbat should be making things as cost efficient as possible with my current setup. The most cost efficient...

I really appreciate you taking the time to help. I've been reviewing my config, experimenting to try and figure out my issue and I've solved one part of it. I'd...

@gcoan - My assumption is that the goal myself and the Original Poster are after is not currently possible with the way PredBat is coded. I've seen this question posted...

I'm also on IOG and use an Ohme charger with an AIO home battery. I've been struggling to pin down some inconsistencies in cost calculations among other issues and this...

This does help thank you @gcoan. The cost tracker I was referring to is the in built predbat savings calculator. It outputs bar charts showing the previous days values for:...

I'm also in this situation. Currently if I get an IOG slot outside the normal window my home battery dumps into the car and I can't figure out how to...

> I believe this is dependent on the actual charger. > I have a Zappi, and when I get slots outside the off-peak period, this is reflected in the Octopus...