BelgarionNL

well if you could integrate it with coral then that would be amazing. together with Frigate this would tackle all my needs. reliable room detection and proper local NVR. I...

nope jellyfin does not require cloud :)

please also create a docker version of this test version so I can roll it out too and report back. edit: wow reverted back to 1.14 with docker and damn...

I have the same thing happening now where 1 of 3 rpi0's simply refuse to join the cluster and follow the leader as it were. I have tried Weight, quorum...

feel free to ask me questions. I can reproduce the error every single time. once I paste in the newer dockable_probe.py

old but for anyone the config is completely wrong. for tmc5160 stepper_X etc.

[config-20230602-225305.zip](https://github.com/protoloft/klipper_z_calibration/files/11887180/config-20230602-225305.zip) > 22 | (125.0, 185.0) | (125.0, 210.0) 23 | (167.5, 185.0) | (167.5, 210.0) 24 | (210.0, 185.0) | (210.0, 210.0) bed_mesh: relative_reference_index 12 is (125.00, 125.00) Starting...

Exception in flush_handler Once the underlying issue is corrected, use the "FIRMWARE_RESTART" command to reset the firmware, reload the config, and restart the host software. Printer is shutdown yep every...

I cleared the klipper log and ran calibrate_z once. [klippy (6).log](https://github.com/protoloft/klipper_z_calibration/files/11887991/klippy.6.log)

you were correct. I tried the new dockable_probe (https://klipper.discourse.group/t/reviving-the-dockable-probe/4256/51) instead of the one I had been using for years from mental. reverted back to old one and it works fine.