BeerMoneyMotorsports

Code Reporting for Voltage during Cranking

9

During cranking, we expect X amount of voltage to have a properly functioning ECU. Below X voltage, we would have inconsistent or no startup. Reporting "Battery below X or minimum...

re drivers not installing

1

Hardware- Hellen Miata all Firmware- current Release and Snapshot. This has been an issue for a little while however i do not know the full scope. Sometimes "install drivers works...

Hellen Miata ETB pins

3

Please unhide the Hellen Miata ETB pins selection. This is for all 4 Miata Hellens.

Timestamp Error scheduleByTimestampNt too far

12

I have experienced this along with Hellen users. Can we fix this annoyance? Complete power cycle resolves the issue. 1-started the engine 2-stopped the engine without powering down ECU 3-waited...

Additional CAN messages

2

I have noticed we are missing a few CAN messages on the Bus. There are probably more that i have not noticed. 1- Low Fuel Pressure 2- High Fuel Pressure...

NC CAN data

2

NC dash(and chassis) CAN broadcasts from fome to support dash, abs, prht, etc. https://github.com/hatsunearu/nc-mx5-miata-canbus/blob/main/mazda_mx5_nc.md

Transmission Gear Ratio presets

1

Implement a dropdown box for some common transmissions. Miata NA/NB 5 speed Miata NB 6 sped Miata NC 5 speed Miata NC 6 speed 350z 6 speed BMW Getrag e30...

Due to frequent requests, I am asking for US customary units to be available options. Fahrenheit, psi, and MPH are needed for ease of use.

ignition IAT tool tip and axis labels

1

Axis name improvements- y- current is "ignitionload load". change to "Ignition Load" x- current is "Intake". Change to "Intake Air Temp C" Tool Tip- add tooltip possibilities- This table allows...