Bas van Drunen

Also i noticed very high value's in the LAmax, initial though was that this was caused by the DNMS, but i have modified the code to never report value's over...

Add in dnms_i2c.h: **#define DNMS_MAX_DB_ALLOWED 140** Add in dnms_i2c.cpp, in the function int16_t dnms_read_leq(struct dnms_measurements *leq): **if ((leq->leq_a >= DNMS_MAX_DB_ALLOWED) || (leq->leq_a_max >= DNMS_MAX_DB_ALLOWED)) return STATUS_FAIL;** before return 0;

Excuses, where i wrote ESP32, it must be ESP8266.

I'm using the following setup: Airrohr-PCB-V1.5 with node mcu v3  teensy 4.0 with DNMS_V1.0.4  both pcb's have the I2c extender. Initial setup i have connected the board using...

Many thanks for yout help Helmut. The new software is now running for 24 hours without any problems so far. For other people having this problem, i have connected the...

What I did is:I used the foam from a paint roller, picture attached. I mounted the mic downwards.Around the big plastic tube is a disc (not on the picture) preventing...

My previous comment did not contain the images, that is why i add them now.