Mikhail Svarichevsky

For these who would be stumbling upon this in the future - here is easier alternative (no metal changes, less/no impact on print volume). Look at standard version. No-nut is...

Is it possible to reduce computation precision on CPU? Down to 8 bit?

Tested on Raspberry Pi 5 - M10 16Gb does not boot (Failed to open device 'nvme'), but works as data drive, which is quite sad. Prices continue to drop -...

> but I decide to set it to zero to start again, without storing the correction This is the core of the issue. Unfortunately, hardware subsecond counter is not accessible...

> by some miracle it seems the following works - but this is definetely caused by a cached iptables configuration. 100% needs to be looked into > > ``` >...

> I had this issue after recent mailcow upgrade and this fixed it. It might be related to borked double-ipv6 activation during upgrade. I remember I got message about activation...

What you can do is use cloudflared to proxy data to local port, and then connect rclone to this local port. cloudflared access ssh --hostname [url_of_your_cloudflared_CNAME] --url [your_local_ip]:8765 Then rclone...

I still see the issue in version 2025.2.0. At the moment I've implemented horrible (=easy to break the system) ICMP-based daemon which can stop and start cloudflared on demand, as...

@GregValiant Yes, top picture is something I had in my mind as well. I've highlighted this variant in the original description. My high-level understanding/hope is that we might get upper...

@smartavionics Result looks very good! Odd and even perimeter speeds can be the same by default, derived from perimeter speed, but can be editable. I.e. not a checkbox for adjustment,...