Alexandru Barborica

This is on ACPI with 3GB limit enforced:  And this is on pure DeviceTree with 3GB limit enforced:  Seems the same. Could be possible DeviceTree is not working?...

> > > CONFIG_SND_HDA_ALIGNED_MMIO=y being missing from the manually compiled kernel might be problematic because the pi4 cannot do unaligned reads and writes without handwritten assembly workarounds. The compiled kernel...

> > > I too experience this issue with 5.13 and 5.14 and acpi + device tree. Booting with u-boot and 5.14, also has this issue, so I would guess...

> > > Please bear in mind that with each version of the UEFI firmware we release, we also update to the latest `start4.elf` and `fixup4.dat` from https://github.com/raspberrypi/firmware/tree/master/boot (i.e. from...

> > > This is possibly duplicate of #157 It might be related but in my case v1.29 fails to boot kernel 5.10.60 which might not contain these XHCI changes...

seems to work fine. Then again I had already migrated to a custom kernel that worked anyway.

Hi. This probably won't help that much, but I am running Fedora 33 with kernel 5.10.14-v8+ on DeviceTree no ACPI and the v3d driver loads fine. This is the raspberry...

I'm going to close this since it's been so long since I ran into this issue that I remember nothing about it.

Yes and navigating to the link in a browser will unveil the reason: error | "Authentication required" It would seem the API has been gated. The error reported by BDFR...

> > Yes and navigating to the link in a browser will unveil the reason: error | "Authentication required" It would seem the API has been gated. The error reported...