Azdiar Gazder comments

Results 6 comments of


                                            Azdiar Gazder

Median grain orientation and the mean grain orientation using the "cluster" function

Hi Ralf, Thank you for looking into this. The `grains.meanOrientation` function is perfect when most pixels within a grain comprise orientations that are closely clustered together. However, when a grain...

Possible bugs with vector3d and Schmid factor related commands?

Hi Tijmen, Thank you so much the comment. However, your suggeston is limited to the uniaxial tension/compression case only. You run into the issues I outlined in Part B of...

Possible bugs with vector3d and Schmid factor related commands?

Hi everyone, We've made a bit of progress on the above issue. As defined in Section 3.2.1 of the reference paper: https://www.sciencedirect.com/science/article/pii/S1359645411008792 The SF2 for rolling is calculated as: ```matlab...

Possible bugs with vector3d and Schmid factor related commands?

Hi Rüdiger, Thank you for replying. 1. I've updated my comment from yesterday to make my first question clearer. Please do have a look at Section 3.2.1 of the reference...

Possible bugs with vector3d and Schmid factor related commands?

Hi Tijmen, Thank you so much for the reply. Could you please provide code for the solution you're suggesting? Ideally, I'd like to post a working generalised example of Schmid...

Map spacing issue due to rounding error on .ctf import

Hi @jhiscocks, I was browsing through the MTEX issues page today when I came across your problem. I can confirm that I've faced the same problems too with OI files....