AuBeTeX

Hi! Sorry the late response. So i attached the asked files. But i created an all in one file too. I'm use that to autolevel, but somehow, after multiple tries,...

Hi! I'm not using clamping. i'm use full area double sided tape. All of the pcb-s same size 160X100mm only the used area is growing not the PCB. i see...

Hi! got one grbl in te attachment... Log: ` ``` Jul 28 20:46:38 CNC-pi cncjs[458]: PID:657> progress info ... line: 37000/40794 Jul 28 20:46:39 CNC-pi cncjs[458]: PID:657> progress info ......

Hi! Yes the cleaning file is left out. in the attachment has 2. With multi tool and a one tool version The multi tool version is looks like an one...

Hi! A question... While your program modify the cnc file, put someone a modified grbl? So the program do that, i can download, and upload manulally to cncjs avoided the...

Sorry, if i'm stupid... This command line option is where? This is not working: ``` cd /root/cncjs-kt-ext/ node . --socket-port 80 --port /dev/ttyUSB0 -o /home/root/ ```

Yes, i'm run all with root to be avoided all permission problem. So this command need to run after applying AL in the console? I'm Trying. Thanks!

Hi! Sorry but i'm bother again. After a long pause, i'm try to create a new board. I reclone the kt-ext from github, and try to re apply the height...

Hi! I have a question. Witch point is the zero? Where measure the initial point, the origin of autoleveling? Thanks!

Hi! Thanks the reply. But then i don't understand. I'm loaded a 0.3 mm circular tool, then set the zero. I'm loaded the copper cleaning grbl, started the autoleveler, with...