Aron het Lam

Visca over IP is available in two modules. I've used the PTZOptics one before, but thers also a Sony one. However, the Visca commands should be the same (at least...

Visca over IP should be the same across devices for all the common features (ptz, presets and so on), so yes. However, i ran into an issue recently where some...

Yes, theoretically it should work, however, I don't have an ESP32 myself to test with. Therefore i also don't have display support built in for the M5StickC. But take a...

[Release v3.1.3](https://github.com/AronHetLam/ATEM_tally_light_with_ESP8266/releases/tag/v3.1.3 ) fixes the last issue to make it work on ESP32 (Which is the microcontroller M5StickC is based on. However, I see that the M5StickC doesn't expose that...

For our setup we use Ubiquiti gear, and usually it's stable from what I know. We don't have freezes. However, the Tallys are out of sight for the operator, as...

With "adjustment pages" you mean in the "ATEM setup" software? The only guess I have on the freezing is as described above. Do you know if it actually reboots, or...

The only ATEM hardware I've worked with is an ATEM mini pro

Recently I tried updating our ATEM mini pro to the latest version, which resulted in it freezing sometimes in the middle of a show. We feed the video to OBS...

Our ATEM mini pro is running 8.2.1

> Be careful while downgrading those ATEMs, already bricked two of them trying to downgrade. Also no chance using recovery then. > > I also experience drops since some weeks,...