Arek

Fair enough. My proposal comes from the idea of mounting single fanon top of teh enclousere, over the the board with cards. Larger one, like 80x80x15 to make it quiet....

Actually started working on that. Some big reconstruction. Assumption: - 8 DRV cards, - limit board size, to fit into cheap 6 layer PCB Thus I did a spit of...

Yeah. W dniu pt., 22.01.2021 o 18:34 ghent360 napisał(a): > I would recommend against carrying large current over IDC cable. The power > input on the motor driver boar would...

So I have put 144 pin STM32F429 chip.  Routing is not completed, as I had to remap almost all signalling pins. I would say I am in teh miidle...

Also please notice the RJ footprint & 3d model. I will push changes towards main branch with proper footprint for Wurth socket and make the decoupling R&C no more optional.

ALARM1 - as far as I know Marlin/Klipper/RRF do not use that in TMC handling. Also printer boards I took a look at, maps ST_ALARM to ENDSTOP. So I take...

I have completed routing of the new controller board, and together with this driver carrier board I have placed order at jlpcb. For 2 preassembled boards, there is no change...

Ouch, newest KiCad 5.99 (kicad-r20550 and later) has issue with zone fillining yet adds something to schema. Now I can edit in my new Schema but can not import that...

Thanx. Will do. Waiting for the prototypes I have started to define a new variant in STM32_duino for STM32F429. Also I am preparing a new environment to compile RRF using...

I have sucessfuly created new board variant and compiled RRF for stm32f429 mcpu with esp8266. However Andy's framework is tailored to STM32F4 witch he used for further corrections. Thus is...