aravis

aravis copied to clipboard

GVSP fails when client has Multiple NICs

11

**Describe the bug** GVSP fails to connect to the client when the client is running on a machine with multiple network interfaces. **To Reproduce** I am running the EPICS AreaDetector...

gilesknap

Flir camera only starting after Spinview

16

I have succesfully integrated aravis with Baumer and Sentech USB3 cameras. Recently, I started to work with a Flir Camera, model BFS-U3-16S2. The camera is recognized, but no images are...

rogerartigaspursals

USB3 Vision with Teledyne Lumerera LT series, UvDevice::_bootstrap Error during memory read

7

**Describe the bug** arv-viewer-0.8, arv-tool-0.8, arv-camera-test-0.8 all fail with the following output using `--debug all:4` ``` [16:17:58.765] 🅸 device> MAX_DEVICE_RESPONSE_TIME = 0x000005dc [16:17:58.765] 🅸 device> DEVICE_CAPABILITY = 0x0000000000000f09 [16:17:58.766] 🅸...

aminArlut

FLIR A6751 Support

19

We have camera FLIR A6751 connected to Raspberry Pi via Ethernet. Camera is correctly detected by Aravis by any streaming ends up errors. ``` > ./arv-camera-test Looking for the first...

BigMuscle85

Emergent Vision polarisation camera (HR-12000SPM) support

5

**Describe the bug** All images result in a timeout, no success getting any images out of the camera. **To Reproduce** Steps to reproduce the behavior: Start arv-viewer-0.8, select the camera...

abrock

Imperx Bobcat 6620C Support

18

I have Imperx Bobcat 6620C GigE camera but I got an error when I tried to run a pipline via Gstreamer ERROR: from element /GstPipeline:pipeline0/GstAravis:aravis0: Could not read camera "":...

SaharGezer

Pleora iPort-SB-GigE support

14

@c10ud wrote: I cannot see video coming from a Pleora iPort-SB-GigE device connected to a Sony Block Here is the output of arv-tool-0.8 values: https://pastebin.com/eCLQEszp And the output of arv-camera-test-0.8...

EmmanuelP

Problems Using Pleora iPORT CL-GigE

16

Hi -- I'm having trouble using Aravis (0.5.12) with a Pleora iPORT CL-GigE Cameralink->GigE Vision framegrabber->gige-converter. (https://www.pleora.com/products/frame-grabbers/iport-cl-gige/) I hooked up the CL-GigE and am able to see the stream of...

zackwyatt

Problem receiving frame with a Pleora device

3

Hi I’m a little new to this, I’m testing with a pleora simulator and aravis8-0-6. From arv-viewer and arv-tools-0.8 I can see the device correctly. The problem I have is...

lililla

`arv-tool values` only show the feature values selected by the current selector value. We should iterate over all the selector values and show the corresponding feature values.

EmmanuelP