notaUser

I'm using an upduino v2.0 Picom is using this:` sudo picocom -b 9600 /dev/ttyUSB1` Building with ``` export PATH=/opt/riscv32i/bin/:$PATH make BOARD=upduino ``` `riscv32-unknown-elf-gcc -v [7:42:58] Using built-in specs. COLLECT_GCC=riscv32-unknown-elf-gcc COLLECT_LTO_WRAPPER=/opt/riscv32i/libexec/gcc/riscv32-unknown-elf/8.2.0/lto-wrapper...

Yep switching to RAM, using the internal UART and setting CS to high allowed me to get UART outputting, but I'm not sure why it wouldn't work when using the...

Okay great, I will attempt to establish 4x10gbps links using a QSFP+ module and a Connect-X 3 Card I have. I also have some Mellanox Innova 2 cards, that have...

I am also having problems setting power higher than 65W on 8750h and I was able to change upper power limits in windows.

New version uses autoconf later than what is in apt repo...

Looks like I was able to get it to work in 2.4ghz mode by connecting the controller via USB and factory defaulting the controller from the 8bitdo software. On Sat,...

This is still broken https://support.xilinx.com/s/question/0D54U00005zHNQHSA4/sd-card-image-from-krs-github-tutorial-does-not-boot?language=en_US&t=1670337200519 Proposed fix of using precompiled system.dtb and uEnv.txt files worked.

I'm also running into this issue building for KR260. ``` CMake Error at /home/nota/krs_ws/install-kr260-ubuntu/share/ament_vitis/cmake/vitis_hls.cmake:110 (file): file STRINGS file "/home/nota/krs_ws/install-kr260-ubuntu/../acceleration/firmware/select/SOC" cannot be read. Call Stack (most recent call first): CMakeLists.txt:21 (vitis_hls_generate_tcl)...

It looks like I have 3 of the 4GB non-crypto version of the card coming in the mail from ebay, when I get home I'll setup an environment to test...

I can confirm as well that when I flash the 8GB ADLT firmware both interfaces show up but I'm unable to get the card to detect optics on either firmware....