Antoni Kijania

Results 8 comments of Antoni Kijania

@ToTheCLI Hi, here is the result: ![omcicli](https://user-images.githubusercontent.com/29311457/225135289-ab7acb02-f093-43fb-8599-010799247cb1.png)

After flashing OLT_MODE 1 and FAKE_OK 1 commands, there is no difference. Halny router/gpon is locked down hard by my ISP and most of the settings in its Web GUI...

After quick googling I found this documentation: https://halny.com/knowledge-base/halny-hl-4gmv-configuration-huawei/ https://halny.com/knowledge-base/halny-hl-4gmv2-configuration-nokia-7360/ https://halny.com/knowledge-base/kategoria/olt-configuration/page/5/ There is a knowledgebase on the Halny website describing how to configure different OLTs for the use with their devices....

Hi, yes I know I changed it later but still no success. I know my ISP uses a combination of serial number and vendor id for authentication, but no matter...

Well, right now my Asus router (gateway) has the 192.168.50.1 address so it is in another subnetwork. If I change the connection type on WAN to Automatic IP, the router...

Yes it should be there by default, but my ISP modified the firmware on the Halny device and its web interface looks more like this: ![halny_web](https://user-images.githubusercontent.com/29311457/226141209-a9e84d66-9acb-478e-8c75-4a1754d3fbec.png) Some menus/sections are missing....

@akw28888 Hi, unfortunately this URL immediately redirects to the router/ONU login page.

Hi there, sorry wasn't following the topic for quite some time. Originally I decided that poking around in the isp router firmware was just not worth the risk and gave...