Chhogori-K2
Chhogori-K2 copied to clipboard
Annex-Engineering
Fully Enclosed, Medium Format, Moving Bed, FDM 3D Printer with Direct Drive Extrusion System
List of issues I encountered during assembly - The backpack extrusions should be mounted using M5x8 BHCS, the eDrawing says M5x10 BHCS. The latter are too long and bottom out...
List of issues I encountered during assembly: - Tensioning the Z makes the rotation on which Z idlers are mounted rotate. The only ways to prevent this at present are...
List of issues I encountered during assembly: 1. The long bolts holding the motor should be m3x45 instead of m3x40. The distance between the top and bottom of the drive...
List of issues I encountered during assembly: - The two spacers that go on the shoulder bolt are swapped. The M5 one needs to be on the threaded side and...
Metadata
Owner
Metadata
Fully Enclosed, Medium Format, Moving Bed, FDM 3D Printer with Direct Drive Extrusion System