AndrewAkinson

I've split off the cross section stations, as this is a real pain in drawing up, the going off the screen is not really a problem Split off issue https://github.com/richsmith/sexytopo/issues/74

In elevations, two planes of cross section are possible, vertical, the normal splint a passage and horizontal, use for pitches. Both should be supported, maybe with the default being horizontal....

The total station also be set with 0 up, 90 level and 180 as down.

Maybe Force to leg, my main concern was force just was a little ambiguous, force what to do what, which once you are use to it will not be a...

My first thought is that while caving, shaking the device is quite common. Accidentally turning the connection off would be annoying! Andrew On 3 Dec 2017 5:45 pm, "Rich Smith"...

Although preference would be to use sketch view, at times it becomes really difficult due to the mass overlap, as I had in Wookey. Yes long press is not that...

issues, yes in principle that is goid, but sometimes they become intertwined, I'll try harded. Mt feelibgvis direct to context, but can I play with an update first, before full...

This basic data format probably should be a high priority, so how do I move a survey from one pda to another? So for one I can just save the...

> All of this becomes more complicated, and sometimes intractable where because the table is not chronological. > > So on point 3, if ST does not move towards a...

On 14 Sep 2017 1:24 pm, "Rich Smith" wrote: The expected way to manually upgrade a splay to a leg is to long-click and select "force new station". Hmm, I'd...