AndrejValand
AndrejValand
I also had some problems with display sometimes not working after contactor switch off/on. I have done extensive testing with an old nasty contactor. Below the HW+SW updates to make...
Sure, glad to be of help to the project. I have tested and you can also simulate the LCD corruption issue with the standard iskra contactor but using a much...
Ok will test this, but need to wait until its over 35°C again and have the car a few hours in the sun:) Tried today a few times as it...
I have 20A main fuses in our house, and have 16A max current set for charging, 6A as the min current. Even if i set max current to 8A and...
Hi, There still was no day that was over 35°C++ in the last two weeks so i made three videos in the mean time (ignore the birds in the background...
Thanks Robert. Will try this today and report back. In the mean time below the videos from two days back when it was 35°C so the CAR started to interrupt...
Was unable to test as its raining like crazy, but did try inside with a simulator. There is one bug if you disconnect charging where DETECTING is on screen it...
Rain stopped and i could make some tests with a real car and it has some problems. The current looks ok but it seams to detect false active phases number...
Was thinking over the weekend. Will phase count detection work ok also in load balancing systems?
Thanks Robert on the updates, The DETECT massage problem is gone. But still i have prolonged reaction time from C->B during the detection phase. This causes the vehicle to enter...