André Kjellstrup
André Kjellstrup
Subject says it all :)
My ini file contains this: PORTBAUDPAIRS\1\baud=115200 PORTBAUDPAIRS\1\port=ttyACM0 PORTBAUDPAIRS\2\baud=57600 PORTBAUDPAIRS\2\port=ttyUSB0 PORTBAUDPAIRS\size=0 When selecting a ttyUSB0 device, baud rate is not set to 57600 Additinally: Can we take it a little bit...
Please make waypoint for a tooltip display distance to next/prev WP. When holding mouse over WP10 - we would see something like: "Distance to WP9, 1013m" "Distance to WP11, 231m"
Imagine a 70 item mission plan. you forgot to add a camera control as #3 - now you need a text editor, or lots of clicking. I suggest a new...
When switching between USB cable and USB telemetry, one needs to open the dialog, select device, select baudrate. When a new device is connected - and no connection is established...
To reproduce: (in this case Fresh installed arducopter.) -connect, open initial setup, optional setup, camera gimbal -assign tilt to ch 10 , roll=ch11 , pan=ch12 trigger=ch13 -restart AP2 (otherwise it...
It would be very nice to be able to open logs directly with apmplanner now that AP2 is rapidly improving it's log-related features. it's not really a request for "options",...
I discovered earlier today that none of three newly built planes goes thru calibration. The timeout timer is running, but no instructions for different directions appear. Then I see rmackay9...
please see http://diydrones.com/forum/topics/wpnav-parameters-changed-to-0-after-autotune maybe there should be some logic that prevented parameters from being written unless all are populated/read before ?
Screenshot says all, "Graph Group" dropbox seems to confuse column width. - but we have plenty of horizontal space left, so the "graph group" column could as well be manual...