Amshatec

after reading openDtu , looks like for ESP32 - S3 there are files for that chips, they also have xxxx.factory.bin for use in the first time , and it works...

Can you bild please a version for the esp32- S3 ?

Thank you very much Unfortunately it didn't work. I've been reading about it, I think you have to provide me with the "bootloader.bin" files, etc., for this board, the settings...

Now its working but its stays on this screen:  i use usb port to flash  my flash settings: 1º selected:  2º:  i reset and etc. Try...

Serial port report: Booting - with firmware version 2.2.0080_develop ------------------------------------------------------------------ UserConfigManager::loadConfig - config loaded from json: /userconfig.json UserConfigManager::begin - Config loaded successfully UserConfigManager::loadConfig - config loaded from json: /userconfig.json --------------------------------------...

Sorry, i´m busy with work. I find that my board is ESP32-S3 with 16 MB Flash 8 MB PSRAM + usb, i try to compile with settings for this board...

hi Finally i got it, im now testing with ESP32-S3-WROOM-1-N16R8 connected to HMS-1000W-2T. how i do: On platformio.ini : ----------------------------------------------------------------- ; Flash: 16MB QD, PSRAM: 8MB OT [env:esp32-s3-devkitc-1-n16r8] platform =...

Just change the title :) 

hi, i try flash your bin file, didnt work, i flashed by UART and USB, keeps booting, i use my bootloader.bin and etc, no lucky. Put this file on "platformio\platforms\espressif32\boards"...