Alvaro Giunta

Hi, I have a PC5200 module and its information was not decoded. The panel is PC1864, it has capacity for 4 of these modules, so configure it in the 4...

Hi @kricon , It's good to know that you were able to verify the auto-arming. Thank you! After seeing what was already decoded regarding the 0x58 command, I realized that...

Hi, i also decode fault states in zones 33 to 64. Fault occurs when there is a short circuit, same as decoded in set 0x01 states 0x6C - 0xAB. I...

Hi @george1616, if you want to track these events, I recommend that you investigate the protocol status notification system. Many of the states that you request are decoded in this...

Hi @george1616, if you want to track the AC loss event, **you can use dsc.powerchange and dsc.powertrouble** just like you did in the example. (I recommend that you look at...