Ali F

Doesn't work

1

Hi Falahati, thanks for your useful software but it seems like it doesn't work properly anymore so I wanted to ask you to please work on updating it for the...

The possibility to change Moonlight ports (client side)

8

I have a use-case where only a certain port range is open on my Public IP address. Therefore I can't put the moonlight server on the default ports. So Is...

Vitis Custom Embedded Platform Creation Example on ZCU104 DPU Test 3: Run a Vitis-AI Demo not working

8

Hi, I've gone through this tutorial with Vitis 2020.2 and Vitis AI v1.3 : [https://github.com/Xilinx/Vitis-Tutorials/tree/2020.2/Vitis_Platform_Creation/Introduction/02-Edge-AI-ZCU104](https://github.com/Xilinx/Vitis-Tutorials/tree/2020.2/Vitis_Platform_Creation/Introduction/02-Edge-AI-ZCU104) With some slight differences: 1. My Vitis platform has a MIG IP core for interfacing...

Problem with depth in Hardware kernel code of Vitis-Tutorials/Hardware_Acceleration/Design_Tutorials/01-convolution-tutorial

4

Hi, I've read the whole tutorial and understood all of it. But an issue I have is that the depth of output_stream in the top-level function of the [filter2d_hw.cpp](https://github.com/Xilinx/Vitis-Tutorials/blob/2021.1/Hardware_Acceleration/Design_Tutorials/01-convolution-tutorial/src/filter2d_hw.cpp) file...

### Describe the feature you want to add to this project Ability for `automl` function to return topk models instead of only the top 1 (best) model. ### Describe your...

### pycaret version checks - [X] I have checked that this issue has not already been reported [here](https://github.com/pycaret/pycaret/issues). - [X] I have confirmed this bug exists on the [latest version](https://github.com/pycaret/pycaret/releases)...

### pycaret version checks - [X] I have checked that this issue has not already been reported [here](https://github.com/pycaret/pycaret/issues). - [X] I have confirmed this bug exists on the [latest version](https://github.com/pycaret/pycaret/releases)...

Interactive HTML parts of output not working

1

## Description of your problem **What steps will reproduce the problem?** 1. Use pycaret interactive parts in spyder-notebook **What is the expected output? What do you see instead?** I expect...

Using maple over Vmess

8

I am trying to use maple for connecting to a V2ray server. I really can't understand how to setup the config file from the documentations. Can you tell me what...

pre-release 1.8.4./1.8.5 start service failure

5

I'm trying to connect to a grpc network vless connection with reality. v2rayNG version 1.8.4 or 1.8.5 won't start service and say start service failure. I tested a normal Vmess...