Alfy

Here you can see i have updated the temperature on 3 Aqara TRVs: Living_Room_TRV: 21.5 Kids_Room_TRV: 17.5 Bedroom_TRV: 22.5 `debug 17-11-2023 18:24:29: Received MQTT message on 'zigbee2mqtt/Living_Room_TRV/set/occupied_heating_setpoint' with data '21.5'...

Forgot to mention that I have fully erased zigbee2mqtt from my system, reinstalled and reconfigured z2m from scratch, re-paired all my devices again to my coordinator and the exact same...

I have reflashed my skyconnect dongle and re-paired everything from scratch, just to rule out the possibility of the last firmware update flashing improperly and corrupting my dongle, but the...

UPDATE: My new Sonoff Zigbee Dongle-P arrived yesterday and I have replaced my Skyconnect with it and re-paired everything to it. So far since yesterday I had no devices that...

Forgot to mention that the living_room_TRV was set to 30 degrees Celsius at 07:01 PM on 21 Dec and stayed like that (with the valve closed) until 11:14 PM on...

Living_Room_TRV got stuck again today around 9PM. Pressing its display opened the valve as usual. I've pressed the TRV's button at around 9:30PM. Logs attached. [log (1).txt](https://github.com/Koenkk/zigbee2mqtt/files/13813359/log.1.txt)

Had a few more occurrences of this issue since i last posted so i decided to try workarounds. I ended up modifying my whole heating automations so that i no...

Same happened to me with a bunch of devices using this integration. Camera, Fan, Humidifier entities became unavailable a few hours ago.

Has anyone tested this with an Ariston Alteas One+ NET boiler, or are there any chances for this to work with that model? My primary concern is to be able...

> For on/off and temperature control, the Homekit integration should work. If your thermostat is anything like the Ariston Cube S Net Unfortunately i have the wired Sensys thermostat which...