Adelaide

**Description:** I tried to do the same thing and I can't get it to work sadly on Linux. **Specs:** - OS: Manjaro 18.1.5 - Version: Yuna 1.4.11

I am having the same problem I think, it says the same error if I run ntfd &, but it also says that the `The name io.ntfd was not provided...

Okay, I found that changing the locale through: `$ localectl set-locale LANG=en_US.UTF-8` happened to fix the issue, thanks!

Okay so I think I figured it out, there is a typo in the `readme.md`, it says `i2detect -l` instead of `i2cdetect -l`. After trying that in the terminal this...

Okay, so I might have figured this one out. I ran `sudo i2cdetect -y 9` (so without the hypen) and it gave an output, but not a very fun one......

Does that mean it should output the clients on that i2cbus? Because I followed the `readme.md` again, and this is the output. As you can see it doesn't seem to...

Here you go. I hope this helps and I have no idea what it means: [prash@Nuru ~]$ dmesg dmesg: read kernel buffer failed: Operation not permitted [prash@Nuru ~]$ sudo dmesg...

So you need the output of AIDA64 than I guess. I will see what I can do.

I don't know if it already works in OpenRGB but if it doesn't work yet I am willing to help again, got inactive last time due to some personal issues....

Here's my output of that command: ```1e:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 XL/XT [Radeon RX Vega 56/64] [1002:687f] (rev c3) (prog-if 00 [VGA controller])...