DAPLink
DAPLink copied to clipboard
ARMmbed
Requires #906. This p-r is replacing the bit-banged SWD implementation with one which uses the lpc4322's SGPIO. Transfer rate reported by IAR is around 380 kB/sec with DAP.nominal_clock @30MHz and...
We have a RT1050_EVB board with QSPI flash boot enabled. DAPLink firmware compiled out within this ARMmbed/DAPLink isn't working. I have tried all below three, none of them works for...
你好，我在keil mdk V5.37.0.0中使用daplink v0257发现无法识别到下载器，然后我回退到daplink v0254发现是可以正常使用的；所有我在想是不是下载器硬件出了问题导致新版有问题，所有我又用daplink v0254版本的固件在 openocd 中使用，发现也是可以正常使用；因此我现在迷茫了，不知道问题出在了哪里。 
This PR implemented the drag-n-drop support for [UF2](https://github.com/microsoft/uf2), which is mentioned in https://github.com/ARMmbed/DAPLink/issues/745#issuecomment-738230690.
Hello, I'm using the LPC55S69 (MCU-Link Hardware) as HIC which I've attempted to port to the MIMXRT1010-EVB as Target. To date I haven't been able to get the device to...
I've got an old project based on DAPLINK version 0254 which is having difficulties when programming a zephyr hex file to an nRF52840 target. I've added debugging in to both...
Hello, I'm using the LPC55S69 (MCU-Link Hardware) as HIC which I've attempted to port to the MIMXRT1010-EVB as Target. With the hardware and software and I can debug the target...
Hi, please find below the changes for the STM32H743XX HIC that we've been working on. There is also an extension of of the usual DAPLink code in the "source/hic_hal/stm32/stm32h743ii/extended_features" folder...
Which one is the file for the custom crystal frequency configuration What is the default crystal frequency of the external crystal of stm32
