租房请PM

STM32SD 移植失败,补了很多路径也不行

1

https://github.com/stm32duino/STM32SD 原来有一个SD的,看了下是用SPI读写的,应该是这个STM32SD的旧版. 能不能请教下如何把这个移植过来?

Starter had some Q for the imem and dmem .

1

In the neo430 Xmen .vhd , we knows 1x16bit splite to 2x8bit , but why the WEbit is 2bit ? I see the RTL, Xmem's R/W_ADDR was connect to addr_i...

有支持IPV6的ED2K服务器么？

2

有没有支持ED2K的服务器的软件，我架设一个试试啊。

CPU 100% when frpc on in the menu

1

CPU 100% when frpc on in the menu , i think the script was bug . ./fprc -c /opt/frp/frpc.ini is working good . so......................... the same problem in the k2,...

24c02 I2C TEST READ ERROR BUT WRITE WORKING GOOD IN RPI-HAL V5.1

2

test code ` program project1; uses rpi_hal,pfio,sysutils; var s:string; begin RPI_HW_Start([InitHaltOnError,InitGPIO,InitSPI,InitI2C]); writeln('a'); I2C_string_write(RPI_I2C_busgen,$50,$20,#$01+#$02+#$34+#$56,NO_ERRHNDL); writeln('b'); I2C_string_read(RPI_I2C_busgen,$50,$20,2,NO_ERRHNDL,s); writeln(s); end. ` pi@raspberrypi:~/btest $ sudo ./project1 2019-10-03 10:24:57 WRN SPI_Dev_Init[0x00/00]: /dev/spidev0.0 2019-10-03 10:24:57 WRN...

大佬静态编译几个吧。W64/L64

打开网络共享文件后，如果断网，会卡死。

2

打开网络共享文件后，关闭再打开文件，如果断网，会卡死。直接断网后，也会有几率卡死。 SAMBA和NFS都试过，都卡住了。无论如何都打不开

"z,x,c" key menu is not displayed, but it can be used, "h" key Menu is unknow command

3

"z,x,c" key radio1,radio2,radio3 menu is not displayed, but it can be used, "h" key Menu is unknow command , "+commandmenu“ or "-commandmenu" not available

armbian kernel 6.6.4x s903l3a HDMI线连接2.5K显示器 分辨率被设定为4k， 字体太小看不清。 已解决

6

**Device Information | 设备信息** s903l3a 全部 CM311-1A YTS / CH / Vo V1 HDMI线连接2.5K显示器 **Armbian Version | 系统版本** 6.6.4x 全部 **Describe the bug | 问题描述** All issues will only remain...