Bimal Dhital
Bimal Dhital
Hello @codeanit , you can access the full shell with Telnet or SSH. Export the config file of the router and modify it's content and set LimitAccount_ONTUSER to false. Upload...
I had a similar issue and I fixed this by replacing the JavaAppLauncher of jar2app. You can get the working JavaAppLauncher from here https://github.com/tofi86/universalJavaApplicationStub Go to that link and you...
> Directly replacing JavaAppLauncher with universalApplicationStub fixes some problems, but because universalApplicationStub is a shell script, it can't be signed and can never get into the app store. If it...
Yeah, I just read the whole conversation in the comments. I guess I will delete this pull request then.
> Hi guys, I just put cups on and I was able to share my printer on a ubuntu 20.04 Laptop, but when I try to connect the printer in...
@amitgorai What's your Hardware Version and Boot version? The current CPEs used by Wlink have been updated with a new system. Every CPE now has a uniquely generated username and...
@amitgorai what are you trying to achieve? If you want the admin access then try going into http://192.168.1.254/su.html and use - Username : wlinkuser - Password : 35wl#Login465 This should...
@amitgorai If you meant the telnet access , you can do that from windows terminal or using PUTTy. On the terminal enter telnet 192.168.1.254 . But since you have connected...
@irfan-vora try this https://dortania.github.io/OpenCore-Install-Guide/extras/spoof.html#windows-gpu-selection , and look at the device properties method. Though the guide is about disabling GPU, you can do the same for your Nvme, just get the...