6by9

Sorry, I missed this one when it was first opened. Whilst Raspberry Pi accept PRs for third party hardware (nwe080 was added for CutiePi https://github.com/raspberrypi/linux/pull/4742) and will do the basic...

If the ID value doesn't match then it isn't a STMPE610, and it should be using a compatible string that matches what it actually is rather than overloading the STMPE610...

Buster will have been running with the firmware based drivers by default. Bookworm has switched to kernel drivers for almost everything, including displays and touch controllers. The kernel will be...

Reproduced. The Pi is still polling the touch controller, and it's responding but saying no touch events. Nothing the Pi can do about that one. If I were to hazard...

#6566 is unrelated - that is for their new screens, not amending support for their old ones. rpi-ft5406 uses mailbox calls to the firmware to poll the touchscreen for when...

> Commenting here to keep track and hopefully shine more light on this issue. Based on my mechanical configuration, many users inadvertently touch the touchscreen while plugging in power. I...

My expectation is that the touch controller on the actual panel is a GT911. The Pi is expecting to see an FT5406. The little MCU is doing protocol conversion to...

> Quick side note for those curious and need a solution fast: [DFRobot's 5-inch touch display](https://www.dfrobot.com/product-2791.html) does not exhibit this issue, at least according to one short evening of testing...

> Replicated the steps on a CM4 + 5in DSI display -> **Non working at all.** Will do another test on fresh Trixie installation for confirming this. It won't. That...

Yes, Pi0-4 with the 7" DSI display (or clones) or DPI configured in config.txt should be able to display this early splashscreen. CM1-4 will need the DSI screen enabled via...