6by9
6by9
This is believed to be related to the autodetection of the displays. Auto detect is there for genuine Raspberry Pi devices, but as these 800x480 panels pretend to the Pi...
> I forgot to say that before opening this issue, i already tried to disable autodetection (display_auto_detect=0) and loading different overlays like these: > > * vc4-kms-dsi-generic.dtbo > > *...
> > For "look like" read "behave like" - I wasn't claiming it was a fake. > > But this is legitimate. They tried to make them compatible with the...
> Anyway, tell me if you still want extended info about I2C status using the i2ctransfer commands. I will do my best to help you to fully solve the issue....
DSI has been fully open since Bullseye came out over 3 years ago, and was an option even before that if you selected vc4-kms-v3d manually. We're open to PRs adding...
> I just tested the firmware you attached and autodetection works again. Is it safe to use for production? It's safe, but please don't. We will get this merged and...
I've realised I made an error within the first test firmware, which would have issues under certain conditions (not yours). Revised version attached if you would care to test it....
Now released via rpi-update. You may need to re-enable with `sudo systemctl enable rpi-eeprom-update` if using this on the system you previously put the test firmware on.
We have started prepping a full image update, so I would expect it to get merged to apt in the next few weeks.
Closing as resolved and released through apt a while back.