3DRZ

> Are there any actual cameras which are worth using with GyroFlow and support LANC? > I could only think about z cam e2... > > Anyway, if this is...

I think here are the necessary infos: http://www.boehmel.de/lanc I thought it would be enought to connect the lanc pin and the ground pin to the device and set the correct...

> The problem with the display is that I have used u8g2 for drawing, which supports only monochrome displays. > Adding support for color lcd's is not currently planned as...

> I am on a trip right now, I will be back on Wednesday. > It won't work with standard software because lanc is constantly polling your trigger source for...

> > > I am on a trip right now, I will be back on Wednesday. > > > It won't work with standard software because lanc is constantly polling...

> > > > > I am on a trip right now, I will be back on Wednesday. > > > > > It won't work with standard software because...

Made the test, with new firmware - camera connected, tested also other pins, but it won't work! [cable.jpg](https://github.com/VladimirP1/esp-gyrologger/assets/34788659/43f760ac-60f1-4f21-9212-e40c63b4ce0f) Made a quick overview on how all the components are connected