20Jakob09
20Jakob09
> Like so: > ``` > uart1: > txd_pin: gpio.15 > rxd_pin: gpio.16 > rts_pin: gpio.14 > baud: 9600 > mode: 8E1 > > SiemensV20: > uart_num: 1 The RS485...
> * Was everything working before the upgrade to v4.0.0 pre2? > Yes, it always worked well, at least when the spindle was started or stopped by the gcode. However,...
I tried what happens when I type m3 S10000 into the command line, and the same error occurs. Is it correct to assume that if spinup_ms is set to 20000...