15367060916

Results 4 comments of 15367060916

Can routers and switches be discovered in the network topology?

My question is similar to yours. There are two hosts and one switch. The host numbers are set to 192.168.1.100 and 192.168.1.50 respectively. I am not sure whether my switch...

Can routers and switches be discovered in the network topology?

This is my configuration file： analyzer: listen:192.168.1.15:8082 fabric: - TOR1[Name=tor1] -> TOR1_PORT1[Name=port1, MTU=1500] - TOR1_PORT1 -> *[Type=host, Name=agent1]/enp5s0 - TOR1[Name=tor1] -> TOR1_PORT2[Name=port2, MTU=1500] - TOR1_PORT2 -> *[Type=host, Name=agent2]/eno1 analyzers: -...

Can routers and switches be discovered in the network topology?

BTW,I would like to ask whether the same configuration is required on each host, that is, each host needs to be configured with the same analyzer address and two host...

I would like to ask you whether the network equipment supported by this tool network topology visualization only supports Cisco network equipment, and whether other types of server switches can be supported

For example, NXP's industrial Ethernet switches, servers, linux hosts, etc., can the network environment built by the above devices be used to visualize the network topology with this tool