lalali

Results 16 comments of lalali

How to set the value of SREV correctly in motor record?

Thanks for your reply firstly. The above reply means that I only need to set MRES for motor resolution and I can ignore SREV & UREV? Another question is about...

How to set the value of SREV correctly in motor record?

OK, thanks very much for your reply. I also want to know that if there is no encoder and UEIP & URIP is set to NO, will the readback value...

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

Sorry, I forgot to upload the above files. It has now been uploaded to the attachment [db and proto and cmd ZipFiles.zip](https://github.com/user-attachments/files/18475207/db.and.proto.and.cmd.ZipFiles.zip) The IOC looks normal and there are no...

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

yes, the device sends device status message automatically to the IOC at 100ms interval after the device start. No need to send a request.

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

You can download these files and test in your computer. Looking forward to your reply.

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

I used a network debugging assistant to simulate communication between an X-ray source and the IOC, so the messages look unchanged. Yes, I have set up asynTrace, and the output...

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

I tested this IOC on a physical machine today. The IOC runs on a CentOS 8 system, while the network debugging assistant runs on a Windows 11 system. However, because...

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

output of the top command at 2025-1-22 **21:53** The IOC has been running for 2 hours, and the resource usage appears to be normal. The send and receive rates of...

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

> Keep observing your IOC process. You may also look at /proc/[PID of your IOC]/statm regularly (every hour or so) and see if any of the numbers keep growing. OK，Is...

After running for a long time, an IOC using StreamDevice and ASYN exhibits significant deviations between the message transmission intervals and the set scan period.

If you have started the IOC as 'st.cmd', then it is that one (PID 2072). If you have started the IOC as '[programname] st.cmd', then look for the programname. In...