Vasco Santos

Hello, Please add support to WLR089U0 Microchip module, the SAMR34 is SAML21 with a SX1276 IC. I do the job: Just and to the lib file Lora.cpp line:125. I change:...

Hello, Can you support BCM5357 device id 0x101ca17f ? Thank you

Compile support for attiny1614

6

Hello, Is possible to support the attiny1614 more (ram/flash) ? I get errors in make because the "USB_INTR_PENDING_BIT": sbdrv/asmcommon.inc: Assembler messages: usbdrv/asmcommon.inc:99: Error: constant value required usbdrv/asmcommon.inc:114: Error: constant value...

sprintf problems with serial.print/corrupted memory

6

I have some problems with the sprintf() with serial.print to print the correct variable, seams that some kind of memory corrupted. When I change to snprintf(), all problems was solved!...

W25Q80BL don't write.

1

Hello, I have tested this lib in other flash's that works, but now with W25Q80BL seams that it don't write. I use the ATSAMD51 (M4) by SPI WP is connected...

Hi, This is not a issue, its a possible feature. I try to use a enc28j60 module, but the ESPWebServer don't bind on that interface, is possible to change the...

Hello, I have the one wire version of this chip, but can't connect to it. Your lib is for 1 One or I2C version, or both ? Thank you

File Manager Panel - Scroll Box

3

Hello, Can you please add in File Manager Panel, one scroll box with buttons (up and down) to be possible to open all files in list ? Regards, VS

Add a possibility to make groups and priority's

1

### ⚠️ Please verify that this feature request has NOT been suggested before. - [X] I checked and didn't find similar feature request ### 🏷️ Feature Request Type Other ###...

RPI Pico and ESP8266

2

Hello, Just report the RPI PICO 2040 - Iterations/Sec : 135.70 The esp8266 (D1 mini) get a dump in detection the cpu processors and get a reset loop. Regards.