Vasco Santos

Ok, that's it, the counters without CPU, Ram or ROM will get the sync? A 4 de janeiro de 2025 12:26:31 WET, AndersBNielsen ***@***.***> escreveu: >The way it is in...

Hello, after some debug about 74hc590... I Detected fakes IC's! I tested the logic and works with low speed clock, but with 1Mhz or so they get completely malfunction, stops...

Hello, yes it 60Hz, any the SYNC error is acceptable, after some debug is finally working!!! The main problem was the fakes 74hc590p. This ones :  Then i tested...

Hi again, the resolution 320x240 is only at boot for start menu ? The 640x480@60 works for the games, but when press: select+start they back to menu as 320x240 or...

Thank you for the interest. It's a custom board that i quick made, but i have the 5v in pin 18, and also ground the 17.  All the resistors...

The 5v is present, is not the HDMI to VGA will not work, the problem is not 5v related. Is some timing detection issue in HDMI with this screen when...

I changed the function to the new storage driver and some other stuff to set for RP2350A. It complies but the code don't work in the device, after I comment...

Fixed the code to detect the RP2350, in rust file, the lib.rs line 502: ``` if info.vid == 0x2e8a && info.pid == 0x000a { ``` to ``` if info.vid ==...