dscKeybusInterface
dscKeybusInterface copied to clipboard
taligentx
An Arduino/esp8266/esp32 library to directly interface with DSC security systems.
Thanks for creating and developing this project, I was amazed when first saw it year ago, but just now got time to get into the testing and write here. Im...
Good Day, Would it be possible to integrate this library/interface with Tasmota?
Continuing discussion from PR #155 for event buffer decoding thanks to the work by @BriceDet. This issue is to decode the event buffer messages with logs of `KeybusReader` while accessing...
Model PC5010 Version 2.0 Battery for zone 11 low 25182.38:[PANEL] 01000001 0 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [0x41] Unknown data[No CRC or CRC Error] 25182.38:[MODULE] 11111111...
Per https://github.com/Dilbert66/esphome-dsckeybus/issues/2, there may be issues with the Keybus data coming from PC5005 panels - this issue is open to collect data to see if it's an isolated issue or...
I am successfully running the Arduino HomeAssistant-MQTT.ino example with Home Assistant (HA). For the life of me I cannot figure out how to force the HA alarm keypad to send...
Zones 1-8 work fine... I also need help programming a reboot every couple of days. After 1-2 days zones 1-8 also stop updating. Any help is greatly appreciated.
Hello! Great work with the keybus! I would like to receive some pointers on how to debug my setup. I'm having an issue where my homebridge MQTT setup is unable...
Just getting started with this but immediately ran into an issue on verify in Arduino IDE. "Sketch uses 32322 bytes (100%) of program storage space. Maximum is 32256 bytes. Global...
Hi. Is it possible to use your library for making a input expander? To buy a expander for more input sensors cost some money and I'm thinking about to make...
