Sims

I don't think it's a good idea to use that type of screen; the ui will be incredibly slow (~4fps) But if you have a correct smartdisplay config, it would...

@dronecz when i was browsing the xtouch repo i noticed they have some sort of a boot delay. If you add a sleep method in the main function for 10-30s...

@dronecz Seems to be put after screen init and before wifi connect/menu loading https://github.com/xperiments-in/xtouch/blob/main/src%2Fmain.cpp#L50 You can sleep the device using the delay(int ms) function. It sleeps for the given time...

@dronecz this isn't display driver code. I don't know where you got that from. I suspect slowly initializing components will help

Duplicate of #67 For now install via platformio: https://github.com/suchmememanyskill/CYD-Klipper/blob/dev/Manual_Install.md#building--flashing-via-platformio

@fanatykCZ516 what happens if you run it via platformio?

(Closing as this issue is a dupe of #67 )

I can confirm using the JST connector next to the usb port, you can provide 5V to VIN and ground to ground, and the display powers on. (using the model...

For tpu, there is already an open issue (#1). For abs, i am not too sure if you can print abs without modification to the printer. Afaik it requires hotter...

@TheHerno out of curiosity, at what hotend/bed temp? Going past 240c without printer modification is really not advisable unless you want the factory ptfe tube to release toxic fumes