scul81

Hi the output of that command gives ``` bcm2835-codec-decode (platform:bcm2835-codec): /dev/video10 /dev/video11 /dev/video12 /dev/video18 /dev/video31 /dev/media3 bcm2835-isp (platform:bcm2835-isp): /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video20 /dev/video21 /dev/video22 /dev/video23 /dev/media0 /dev/media2 unicam (platform:fe801000.csi):...

I have done some more reading, this thread is helpful. https://forums.raspberrypi.com/viewtopic.php?t=325259 ``` The output of "libcamera-hello --list-cameras" equals [1:19:22.870166766] [1172] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3424-e68e0f1e [1:19:22.897339457] [1174] ERROR CameraSensor camera_sensor.cpp:551...

I have not added it as an MMAL camera, as that does not work.  The interface produces an error, the camera box remains black and you can click the...

I have now switched the configuration back to legacy stack. Under the MMAL selection the problem remains the same. The block remains blank and you can click OK but it...

Well Camera detected with that command  No camera detected in motioneye 


I just tried this, installation got stuck on this 

Just to let you know I have managed to get it working on the previous version of Raspbian (Buster) through Python3. The camera will only work as MMAL and not...

I also have this problem with a rig containing 4x 1660 Supers I was mining ETHW and the miner suddenly stopped. I have tried different miner software and also different...