Stefan Allius
Stefan Allius
This pull request deals with some problems that arise from the use of Bedrock Roots. There is a conflict around the definition of `WP_CACHE`. WP rocket normally sets and deletes...
The GEN3PLUS inverter sends the 'catch-up' data with every connection. It would be very easy to send this data to the MQTT broker with the old timestamp. But Home-Assistant only...
Can you send me a trace or a dump of one of this additional packets with catchup data? Maybe I can add a filter or a timestamp to the MQTT...
Pls send a mail: [email protected]
Thank you for the trace. This behavior only seems to be implemented in the rare version SW_400_V1.00.20. However, the GEN3PLUS inverters also do this. In a later version I will...
Please try the release candidate v0.8.1-rc.1. There is a hot fix which should fix the connection problems for the GEN3 inverters with version 0.8.0. The filter for the catch-up data...
I'm sorry, but my knowledge is, that you can't add DNS entries on a Fritz!Box directly. So you must use a local DNS Server, like Pihole, for that. If you...
Hi jo-mueller, yes GEN3PLUS inverter also could have a serial number with `Y47`. Here you find a description to configure the GEN3PLUS inverters.
It is really not simple. Until the user can have firewall rules, NAT, Hair-Pin-NAT etc, I would prefer to send a real packet to the well known port 5005 and...
If we have a loop, we will get a lot of new connections from the same endpoint with the same inverter serial number. That can be normal, if the inverter...