EvilGenius

Yep, but not Marlin-compatible at the moment. See here: https://duet3d.com/wiki/G-code#M408:_Report_JSON-style_response To poll status lcd panel sends M408 to the printer and waits for JSON response. "Connecting" status means there is...

This needs to be tested, potentially this makes Marlin compatible with PanelDue and this firmware too.

This project is low priority at the moment due to high load on other (non-public and well paid) projects. My plans for this project include implementing printing from on-screen media...

Sounds great!

Storage printing is already implemented in other (not PanelDue fork and it's fully Marlin-compatible) MKS-TFT32 firmware (see here: https://www.youtube.com/watch?v=LfauV0CJYfo). Now I need to merge these two very different pieces of...

Hi Viacheslav! I'm very pleased that you find my work useful. As you already discovered I used different build targets to configure the source tree for MKS-TFT32 no-bootloader configuration, simple...

Sorry, Roberto, I didn't get what you want. This is LCD firmware, do you want me to alter MKS Sbase firmware? I don't have the board at the moment.

MKS-TFT can be connected directly to the MKS SBase, there is a special connector for that. I cannot provide instructions for configuring SBase firmware because I do not have one....

Update 06/20/2017: firmware is in alpha stage, printing on Duet 0.8.5 seems to be working, most of functionality is not tested yet. Printing from on-screen USB stick & sd-card is...