Robin

You may be able to get this to work using *multiarch*: > > 32 bit compatibility > > It is possible to run *32 bit **armhf* binaries, such as >...

That page dates from 2019, pre Pi OS Buster. However, ImageJ itself appears to support OpenJDK 11, as suggested at https://imagej.nih.gov/ij/notes.html. You might, probably should, be able to get ImageJ...

Michel, the binary package at https://software.opensuse.org//download.html?project=security%3Azeek&package=zeek-lts, which is presumably what you tried t install, is an *armhf* package, not an *aarch64* (arm64) package. You may get better results using the...

It makes *far* more sense to start GQRX with the *-e* flag if the previous SDR hardware is no longer present. Why? Because: 1) the problem is most probably in...

As Vlad notes, it's *much* simpler to solve this problem by using a USB extension cable to remove mechanical stress. Otherwise one is destroying a cheap socket, and an expensive...

DJ, the address you've quoted is an IPv6 compatibility representation of an IPv4 address, such as one might use on a network using mixed IPv6 **and** IPv4 addresses, as noted...

Marc, 2011, adding to what's written below, RTTY uses a truly *ancient* modulation system. Two tones are specified—mark and space—but with no specification as to how to transition from one...

To receive an FM station with ±75kHz peak deviation with *low distortion* requires a wider bandwidth than Carson's rule suggests. Hi-Fi FM tuners have offered bandwidths up to 400kHz to...

There is a problem with the partition for the **rootfs** filesystem on the V3.3 image. The filesystem is around 19 GB, but the partition has been set to 120 GB...

There are **no installation packages** for **24.04**, **23.10**, or **23.04** in the **stable PPA**, since the last package build was about 2 years ago. The most recent Ubuntu version supported...