platform-ststm32

platform-ststm32 copied to clipboard

Toolchain not available for linux_arm7l (Raspberry Pi)

11

Just updated pio. It uses 7.0.0 now and that cannot satisfy the required 1.9.x toolchain for a linux_arm7l arch (Raspberry Pi host, STM32 target). Fixing STSTM to 6.1.1 is working.

juleq

Add SPL support for bluepill board

8

This PR * activates the SPL framework for the `bluepill_f103c8` target * adds a blink LED example with SysTick usage for accurate timing (thereby tests the HSE PLL) This needed...

maxgerhardt

this is the error ``` AVAILABLE: blackmagic, cmsis-dap, dfu, jlink, serial, stlink CURRENT: upload_protocol = stlink Uploading .pio\build\genericSTM32F103ZE\firmware.elf xPack OpenOCD x86_64 Open On-Chip Debugger 0.11.0+dev (2021-10-16-21:19) Licensed under GNU GPL...

morestart

[framework-spl] arm-none-eabi-as: unrecognized option '-x' (fix included)

2

Attempting to build any SPL project for F0 fails with the error: `arm-none-eabi-as: unrecognized option '-x'` This appears to be caused by `framework-spl/stm32/cmsis/variants/stm32f0/startup_stm32f0xx.s` ending with a lowercase s. As a...

schwert

OpenCR Board Support (STM32F746ZGT6)

11

It'd be awesome to be able to work on OpenCR robotics projects with PlatformIO instead of the Arduino IDE. OpenCR is an awesome project: it has a wide variety of...

airhorns

STLink upload does not work with STLink clones

5

Alright so me and @coyt have tried this and verified the problem. We both are using ST-Link V2 clones from [Amazon](https://www.amazon.com/DAOKI-ST-Link-Programming-Emulator-Downloader/dp/B01EE4WAC8/ref=pd_lpo_vtph_147_lp_t_2?_encoding=UTF8&psc=1&refRID=7PF6NY4Y8RFB4158SR9A) and haven't had success uploading. We get errors that...

kiranshila

Implement `upload_resetmethod` option for stlink upload

4

The ST-Link upload fails with some clones of the ST-Link device, because they do not support the reset pin properly. This results in the error `Error: timed out while waiting...

saierd

Please add STm32F446xx too all necessary libraries for FSMC support. Currently the SRAM Hal library cannot be resolved. Which leads to an error during build in marlin.  I found...

mkornmue

Subj

MesaCrash

Hello, I just added this board definition and tested it on a STM32F302C8T6

NitroHxC