Michael Kotten

I thought this would be https://github.com/bohdan-s/SunGather/blob/main/SunGather/registers-sungrow.yaml#L299 onwards for voltage and https://github.com/bohdan-s/SunGather/blob/main/SunGather/registers-sungrow.yaml#L1345 onwards for current 🤔?

You are right for the current, but voltage works always: 

Found that, too. Additionally there is another one for the total power: ```yaml - name: "meter_total_power" level: 2 address: 5601 datatype: "S32" unit: "W" models: ["SH5.0RS","SH3.6RS","SH4.6RS","SH6.0RS","SH10RT","SH10RT-V112","SH8.0RT","SH6.0RT","SH5.0RT"] ```

And I can confirm that its working (at least on the SH10RT) with DTSU666.

Is this even possible? Do you have any documentation how to do that?

Reminder to myself: https://blog.loetzimmer.de/2017/10/amazon-alexa-hort-auf-die-shell-echo.html

The ip address is just for people who are using more than one network interface on their pimatic host system (aka raspberry for most users). If you just use one...

We‘ll just open this one again

Please post the config containing the IP address. I couldn’t find it in the attached config.txt

As I wrote before you don’t need to set the up address.