Michael P.

Can add the log from Z-Way, for same device. Maybe it can help to understand how they solve it. (at 06:15 a timer was working) ``` [2019-10-08 06:15:00.657] [I] [core]...

right, forgot about it ;) Here is a log without S2 (value will be changed in interface): Anyway is using CC Supervision, device was included insecure - and the S2...

I have noticed, if make a polling request then the right value will be given. Not sure, could it be a workaround for the > 0x01 = "Try again in...

I was thinking about a "one-time-call" of course ;) After the "busy code" of device. I'm not looking for a solution for myself, but all OZW users, like Domoticz, HomeAssistant...

If I could, I'd do it right now. But unfortunately I have no experience with the code, so I hope someone else can do this much better and faster ;)

I use the esera eBus ethernet adapter, direct connected to Raspberry And I had no problems with older ebusd version and have no problems with current version for all other...

After some hours read is ok,... ``` 2021-10-28 13:24:22.002 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0518, HW7401 2021-10-28 13:24:22.447 [bus error] send to 08: ERR: ACK...

ok, will do. Bu why I have these problems only with bai parameters? Is there something special?

(please take file below) Here is the starting sequence and some working requests of other parameters inside. Additional the ACK error while "scan config 08" If you need something else...

[ebusd.log.gz](https://github.com/john30/ebusd/files/7444340/ebusd.log.gz) Replaced file - here is better content... as sample this: ``` 2021-10-29 19:51:20.902 [update notice] sent poll-read 470 YieldThisYear QQ=31: 0;0;0;0;0;0;0;0;0;0;0;0 2021-10-29 19:51:20.902 [bus notice] >3115b509030d3d584e00 2021-10-29 19:51:21.494 [bus...