Meng Zhuo

@ekakela if you like Golang , you can try my lib https://github.com/mengzhuo/go-usb-relay no cross compile issue

``` ESTAB 0 550164 10.0.0.140:45756 34.98.107.15:443 users:(("rdb",pid=563753,fd=8)) ``` I found this weird connection to Google with RDB, undocumented require service in [wiki](https://go.dev/wiki/DashboardBuilders)?

Try again and you will find it only resize to maximum size of that partition. p.s. Can you show me your `cat /proc/partitions` ?

Thanks for report and it's a known bug as labeled . You can use vendor partition as root partition `fastboot flash vendor *sparse.img` and change root from sdd12 to sdd13...

 You might need to check your UART here is my settings.

> is that 1.8 Volts? most USB to serial are either 3.3V or 5V. > 1.8v and it is same with Hikey960 https://www.96boards.org/documentation/consumer/hikey960/hardware-docs/hardware-user-manual.md.html#uart > The unused usb-C connector on the...

> The USB-C next to the HDMI is for fastboot. > The USB-C next to the two buttons is the serial console, does output only. > You can try my...

I haven't test that yet. It should be automatically connect to Ethernet via DHCP then you can use ssh to login.

It's true that it depends on user settings of monospace fonts, see http://comments.gmane.org/gmane.emacs.devel/149632 I think we can add an option, which is choice whether to use twice width of CJK....

@gopherbot Please open a backport to 1.22.