Jon Nettleton

Is this only true if the interface is on the systemBus()? These signal names should be reserved for gobject introspection. I can poke further into the spec if needed. On...

What are the temperatures it is reporting? Does it move up and down properly when in use. Please use something like cpuburn to increase the temp. On Sat, Dec 20,...

Are the Older CBi's dev units or purchased units? On Mon, Dec 22, 2014 at 12:02 PM, susisstrolch [email protected] wrote: > Same problem here - with an OE5RC3... > Old...

My guess is that the 25c calibration fuse is wrong. On Mon, Dec 22, 2014 at 3:50 PM, Rudi Ihle [email protected] wrote: > @linux4kix https://github.com/linux4kix: Mine is probably a dev...

Rudi, if you revert that patch does temperature reading work properly for both units? Perhaps we need to test if there is hot point calibration data and then only use...

great thanks. On Tue, Dec 23, 2014 at 1:15 PM, Rudi Ihle [email protected] wrote: > Will test when I'm at home this evening. > > — > Reply to this...

Okay those numbers look better. If reverting the patch fixes the older silicon rev then we may be able to use that as the identifier for the algorithm used. On...

It probably doesn't revert cleanly. I can write a quick patch when I get home for you to test with. On Dec 23, 2014 3:22 PM, "susisstrolch" [email protected] wrote: >...

Thanks for the patch, but this needs to be broken down in to smaller changes that can be followed. There are some obvious problems that I see like have your...

Are these just the most recent patches from FSL from 3.10.31 or have you made changes? You need to keep FSL patches separate from your own in order to retain...