Cosmin Gorgovan

Sorry, I can't share these particular models. But the GUI thread always seems to be blocked for a large part of the time it takes to generate the toolpath. I'll...

You want @lgeekj here, not me :)

Hi. It would be useful to know whether it uses a soldered eMMC or removable uSD for internal storage. You could also check the layout of the internal storage to...

>> You could also check the layout of the internal storage to see if it matches the one used by the i.MX507-based devices and described in the README. > Hmm......

@anarcat I've ended up ordering a Glo HD since I'm pretty keen on getting okreader running on the i.MX6-based devices (and checking out the newer eink screens). Don't expect instant...

@almostalive There's experimental support in the [glohd_bringup](https://github.com/lgeek/okreader/tree/glohd_bringup) branch, which *works for me*. It's missing u-boot and I need to do some cleanup, but I didn't have time recently.

@jellelicht I've also updated the README in that branch, it should get you started. @almostalive I haven't replaced the u-boot image. My koreader fork doesn't have any additional commits, but...

@almostalive Both problems could be caused by a failure to load the kernel modules, either because they're not available in `/lib/modules` or because of a version mismatch with the kernel...

@anarcat I've been using the version from the glohd_bringup branch on my Glo HD since May last year. I've not tried using wallabako.

Hi houqp, I've been using it for almost an year now. There are a few rough edges: - there's no UI for mounting the device over USB for synchronisation (the...