Leandro Heck

@Nibbels I tested some caps in the termistor therminals, near the board. I tested some Values from `22pF` to `0.4uF` but the curves have the same spikes. Nothing has changed...

Oh, I just need to run the command, got it. @repetier, Where should I put the method? And how much repetitions should I do? `M303` command syntax for reference from...

I got, this. Is it right or good? How do I know? 

> Have you tested the line when you have the new thermistor instead connected? Yes, I added it here some comments before, look https://github.com/repetier/Repetier-Firmware/issues/811#issuecomment-415869341 > I do not mean in...

Cool, autotune the PID was good. It is printing more than 7 minutes :) I am using the original thermistor. Everything looks good so far 

Actually, I am not sure if this is good. The swing seems to be increasing. 

Cool, it is getting stable again. 

@Nibbels @repetier my test part just finished fine! So, it is working again. I still have to print something that was giving me issues to see if it is ok....

I am also seeing this. I can't find any checkbox (on host and server) to toggle this mode. Any help? My workaround to fix it is restart the repetier server....

So the idea is to populate the sockets with the IC. @poeschlr said that it is better to have a whole model with the socket+ic because adding the IC model...