Leandro Heck

Printing log from the server. Is it possible to be something related with the model/gcode? ``` 15:59:41.868: FIRMWARE_NAME:Repetier_0.92.9 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3 15:59:41.873: Printed filament:708.66m Printing time:16 days 14...

Good thanks for the explanation. So I have some issues here. My thermistor cable is not twisted and it touches the hotend wires all the way long. I will try...

Do you have an example of temperature graphs that are actually good? I have some issues even with motors stopped. For example, I set the extruder with 60oC. It doesnt...

With a short (15 cm) of twisted wire and a 100k resistor, the line is flat. It was me messing with wires before `57:45`. So my problem my be the...

I am buying a new thermistor, but I still feel that the problem isn't the thermistor. There should be something else. Analysing some prints I took from the temperature curves...

Good, I will try to increase it a little bit first while I wait the thermistor to be delivered. I guess I have the default value `EXT0_DECOUPLE_TEST_PERIOD = 12000`. Is...

Changed the thermistor, finally. Heated bed, extruder and motors, and fan are off. It is currently glued with tape on top of the heated bed. It is an 100k NTC...

Just for the sake of comparison, this is my current temperature sensor (I don't know the model, it should be the same as the one I bought). All is off...

Is it possible that I am using a wrong configuration in the firmware? I am sharing it here just in case. [Configuration.zip](https://github.com/repetier/Repetier-Firmware/files/2320013/Configuration.zip)

Hi @Nibbels, the EXT0_HEAT_MANAGER 3 is the "Dead Time Control" This is the config that came originally with my 3D printer. So, what is the best out-of-the-box cofiguration here? What...