larsmm

Results 25 comments of larsmm

How come it can only be powered off when speed < 20?

This is for safety. You would not be able to steer or break if it would power off on high speed. 20 is nearly no speed. Use other values if...

How come it can only be powered off when speed < 20?

Long before battery is in an undercharged state the warning beeper gets activated. If you ignore that and drive a very long time without stopping, it can get dangarous for...

How are the 2 mainboards connected in the Bobby car project?

Here some information about that: https://larsm.org/allrad-e-bobby-car/

How are the 2 mainboards connected in the Bobby car project?

I have 1 button for 2 mainboards. I connected it via Y cable directly to both mainboards.

UNKONTROLLIERTE RÜCKWÄRTSFAHRT

Hi, please have a look at the new project. This one is deprecated. https://github.com/EFeru/hoverboard-firmware-hack-FOC

Has anyone made a hoverboard controler balance again?

This Project is deprecated. There is an more advanced version that has emerged from this project: https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC

possible to use STM32CubeProg to flash the mainboard?

This Project is deprecated. There is an more advanced version that has emerged from this project: https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC

Is possible to connect with ReP_AL-3D-Lawn-Mower?

This Project is deprecated. There is an more advanced version that has emerged from this project: https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC

I wire the potentiometer with 15v and the board shutdown

Hi, please have a look at the new project. This one is deprecated. https://github.com/EFeru/hoverboard-firmware-hack-FOC

using wayyyy too much CPU??

Yes, that is normal ;-) Pull requests are welcome.