Ivan Grokhotkov

Indeed that looks seriously broken! Are you using the camera header on WROVER-KIT or are you wiring the camera to another development board? Have you tried enabling the test pattern...

Common OV2640 and OV7670 modules have similar pinouts, so both are compatible with WROVER-KIT. As @wdouglas1999 has mentioned, OV7670 does not support JPEG format, so if you need to upload...

Hmm, it seems that the documentation has fallen out of date with respect to the code. The demo no longer prints ASCII art output on the console, instead it starts...

Based on the image, it looks like there is some serious noise on the lines between the ESP and the camera. How long are the wires connecting the camera to...

Lens out of focus perhaps, try rotating it?

This remark is about the case when cameras with different pinouts are plugged into WROVER-KIT camera header. Because some of the pins routed to this header are input-only (34-39), this...

Don't see any potential issues. I think this pinout should work fine.

That actually gives me an idea to put a PCB equivalent of https://github.com/igrr/esp32-cam-demo/blob/master/pictures/ov7725-alternate-wiring.png onto dirtypcbs.com or OSHPark, so that folks who need can order the same design.

That's correct, but also mind the bootstrapping pins of ESP32 (0, 2, 12).

@Oitzu Done! Here's the breakout: https://dirtypcbs.com/store/designer/details/igrr/5842/cam-breakout-v1-zip. Note that i forgot to add footprints for pullup resistors on SDA and SCL, to my defence it seems that the modules already come...