operating-system

operating-system copied to clipboard

### Describe the issue you are experiencing Hi, I am unable to upgrade the home assistant to the new version (doesn't matter if it is core/superviser or anything else). Error:...

kuki13

Update to 8.4 not doing anything

15

### Describe the issue you are experiencing Dear community, Since a few days I am trying to update home assistant os from 7.6 to 8.4 with no luck. **Installation via...

mikeplanzer

Is Raspberry Pi 3B + still viable? I'm crashing almost every day.

2

### Describe the issue you are experiencing Memory is bouncing off 100%, normally over 90% and hits 95%+ a lot (I setup an alert). Power cycle is required. I can...

magic7s

search domain is unset when IP is configured as static

6

### Describe the issue you are experiencing The issue here is the missing search domain under network settings, because with a static IP the search domain is not part of...

NODeeJay

Virtualbox 6.1.32, EFI boot error

9

### Describe the issue you are experiencing I update to 7.4 and as had been the case lately, updates to new home assistant os versions crashes the virtualbox emulator. I...

tetsuo55

Feature request: Support remote serial devices via usbip

16

**Hardware Environment** - [X] Raspberry Pi 4 - [X] Synology with HA via docker container ## System Health version | core-2021.5.3 -- | -- installation_type | Home Assistant OS dev...

poldim

zigbee not working with SSD Boot on Pi4

5

### Describe the issue you are experiencing I have an unusual probelm... I have RPI4 running from a SD card, with ZWave and ConBeeII USB sticks. The system was running...

Gargy

time sync fragile, requires DNS to work by default

3

### Describe the issue you are experiencing In haos in KVM, i repeatedly saw `systemd-time-wait-sync.service` systemd unit timing out. /etc/systemd/timesyncd.conf has a single, hardcoded primary NTP server `time.cloudflare.com` and NTP...

jackwasey

USB stops working after some time on XU4

4

### Describe the issue you are experiencing After a reboot of the host, all USB ports run fine. But after a few hours, one of the USB ports stops responding...

RikVerstijnen

HAOS server has no IP address when DHCP server not available on boot

2

### Describe the issue you are experiencing When booting HAOS and a DHCP (v4 in my case) server is not available then the Ethernet interface never gets an IP address...

gwww